Black Mass Electronics 1312 Distortion V3 - Pink

Message from Black Mass Electronics:

The 1312 began its life as a physical embodiment of one of Black Mass Electronic’s fundamental beliefs:

Black Lives Matter.

Trans Rights are Human Rights.

The 1312 Distortion is a famous three letter 🐀 distortion circuit with 8 different clipping options on a rotary switch. The 1312 V3 features an internal charge pump that turns your 9V supply voltage into 18V for increased headroom. You can use an 18V supply but you must change the internal dipswitch settings FIRST. Please reference the manual.

Accolades:

• 10/10 Rating from Guitar.com
• Editor's Choice from Guitar.com
• Favorite Distortion of r/guitarpedals 2021.

Controls:

Level: Controls overall output level
Filter: Turn clockwise for more treble
Gain: Controls the amount of drive/distortion
Clip: 8 Way rotary switch for selecting clipping diodes. Rotating clockwise, starting at “noon,” clipping options include:
•Vintage Germanium
•Red LEDs
•Silicon
•Asymmetrical MOSFET
•Silicon/Ge
•MOSFET
•Asymmetrical Silicon
•Quad Silicon

Power:
•Standard 2.1mm center negative power only.
•9V DC Only (can run at 18V if you change the dipswitch settings inside)
•Do not run at higher voltages, or use the wrong dipswitch settings.
•Current Draw: <100 mA
•Use an isolated power supply. Daisy chains will often work fine but can introduce unwanted noise.